10
Using the Box Functions
10-16 C350
10.10 Performing Forward to PC Operations
The image data in the box on the hard disk of this machine is forwarded
to a computer using FTP.
✎
Note
An FTP server application must be installed on the computer and the
application must be running when the image data is being received.
10.10.1Flow of Forwarding Operation
Procedure
1 Using PageScope Web Connection, perform one-touch key
registration or temporary key registration.
☞ “Registering Destinations in Advance” on page 8-25
2 Set the FTP application.
☞ “Setting the FTP Application” on page 8-54
3 Start up the FTP application on the computer.
4 Using this machine’s control panel, select the files to be forwarded.
☞ “Selecting the File to be Forwarded” on page 10-4
5 Using this machine’s control panel, specify the forward destination of
the image data.
☞ “Specifying the Forward Destination” on page 10-5
6 On this machine’s control panel, press the [Start] key.
The image data in the box is forwarded to the application that receives
the data using FTP.
7 Check the image data on the recipient computer.
✎
Memo
If the registration of the destination and the FTP application
configuration are already done, perform steps 3 through 7.
The forward destination to the computer is the root folder specified by
the application. The destination cannot be specified from this machine.
To Next Page
Loading...
Need help?
General
