Using the Box Functions
10
C350 10-1
10 Using the Box Functions
This chapter describes the procedure for forwarding the image data stored
in boxes on this machine’s hard disk using the Box functions.
✎
Note
To use these box functions, an optional hard disk must be installed in
this machine.
✎
Memo
For the procedure of saving the image data in the box on the hard disk,
refer to “Performing Scan to HDD Operations” on page 8-55.
10.1 Overview
The following box functions are available on this machine. Use the
appropriate type that matches your network environment and application.
Forward to E-mail Forwards the image data in the box by attaching the data to an
e-mail message.
Refer to “Performing Forward to E-mail Operations” on
page 10-12.
Forward to FTP Server Forwards the image data in the box to an FTP server.
Refer to “Performing Forward to FTP Server Operations” on
page 10-14.
Forward to PC Forwards the image data in the box to a computer using FTP.
Refer to “Performing Forward to PC Operations” on
page 10-16.