Using the Scan Functions
8
C350 8-59
8.10.3 Setting the Storage Period of the Scanned Data
Using PageScope Web Connection, you can set the period that scanned
data is stored on the hard disk.
Setup procedure
1 Start up PageScope Web Connection.
2 Enter the administrator access code, and log in to Administrator mode.
3 On the “File” tab, click File Storage Life in the menu.
4 Specify settings for the following.
❍ File Storage Life: Specify the storage period of the files on the
hard disk.
Settings: “No File Time Limitation”, “1 day”, “2
days”, “3 days”, “4 days”, “5 days”, “6 days”, or
“7 days”