11-8E
TECHNICAL SPECIFICATIONS - CHASSIS 620 LC4 COMP. ‘98
620 LC4 COMP.
Frame Central chrome-moly-steel frame
Fork WP Extreme
Wheel travel front/rear 280 / 320 mm (11,0 / 12,6 in)
Rear suspension Central shock absorber (WP) with PRO-LEVER linkage to rear-swingarm with needle bearing
Front brake Disc brake with carbon-steel brake disc , brake caliper floated
brake disc Ø = 300 mm (11,8 in)
Rear brake Disc brake with carbon-steel brake disc Ø 220 mm (8,7 in), brake caliper floated
Tyresfront 90/90-21 T63
Air press. road, driver only
1,5 bar (21 psi)
Air press. road with passenger
2,0 bar (28 psi)
Tyres rear 130/80-18 T63
Air press. road, driver only
2,0 bar (28 psi)
Air press. road with passenger
2,2 bar (31 psi)
Fuel tank capacity 12 liter (3,2 US gallons)
of that 2,5 liter (0,7 US gallons) res
Final drive ratio 16:40
Chain O-ring
5
/8 x
1
/4"
Battery maintenance-free battery 12V 8Ah
Steering angle 62,5°
Wheel base 1510
±
10 mm (59,4
±
0,4 in)
Seat high 955 mm (37,6 in)
Ground clearance 335 mm (13,2 in)
Dead weight without fuel 133 kg (293 lbs)
Max. permissible front axle load
211 kg (466 lbs)
Max. permissible rear axle load
335 kg (737 lbs)
Max. permissible laden weight
350 kg (770 lbs)
918 S 757
Compression adjuster 12
Rebound adjuster 12
Spring 4,4 N/mm
Spring preload 10 mm
Air chamber length 160 mm
Capacity per fork leg ca. 800 ccm
Fork oil SAE 5
STANDARD ADJUSTMENT - FORK
NOTE FOR WP EXTREME FORKS:
The damping units in the left and the right fork leg
are of different design. Make sure not to mix them
up in case of repair or service works.
118 S 701
Compression adjuster 3
Rebound adjuster 5
Spring 66/260
Spring preload 23 mm
STANDARD-ADJUSTMENT - SHOCK ABSORBER
To Next Page
Loading...
Need help?
General
