BRAKES 110
100074-10
– Check the brake linings of both front brake calipers for minimum thickness A.
Minimum thickness A ≥ 1 mm (≥ 0.04 in)
» If the minimum thickness is less than specified:
–
Change the front brake linings. x ( p. 112)
– Check the brake linings for damage and cracking.
» If damage or cracking is visible:
–
Change the front brake linings. x ( p. 112)
– Install the wheel/wheels. ( p. 126)
11.7Removing front brake linings x
Warning
Danger of accident Brake system failure.
– Maintenance work and repairs must be carried out professionally. (Your authorized KTM workshop will be glad to help.)
Info
The operations are the same on the left and right.
– Remove the wheel/wheels. ( p. 125)
– Pull the hand brake lever and release it again.
Locking pawl moves into its basic position, parking brake is deactivated.
To Next Page
Loading...
Need help?
General
