BRAKES 119
301807-10
– Add brake fluid to level A.
Brake fluid DOT 4 / DOT 5.1 ( p. 182)
– Mount the screw cap with the membrane and tighten.
Info
Clean up overflowed or spilt brake fluid immediately with water.
11.14Checking rear brake linings
Warning
Danger of accidents Reduced braking efficiency caused by worn brake linings.
– Change worn brake linings immediately. (Your authorized KTM workshop will be glad to help.)
100038-10
– Check the brake linings for minimum thickness A.
Minimum thickness A ≥ 1 mm (≥ 0.04 in)
» If the minimum thickness is less than specified:
–
Change the rear brake linings. x ( p. 123)
– Check the brake linings for damage and cracking.
» If damage or cracking is visible:
–
Change the rear brake linings. x ( p. 123)
To Next Page
Loading...
Need help?
General
