COOLING SYSTEM 140
301838-10
– Remove radiator cap 3. Completely drain the coolant.
– Mount screw 1 with a new seal and tighten.
Guideline
Screw, water pump cover M6 10 Nm (7.4 lbf ft)
– Mount screw 2 with a new seal and tighten.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
14.6Filling coolant/bleeding the cooling system x
Warning
Danger of poisoning Coolant is poisonous and a health hazard.
– Avoid contact between coolant and skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact
a doctor. Wash affected skin areas immediately with soap and water. If coolant is swallowed, contact a doctor immediately.
Change clothes that have come into contact with coolants. Keep coolant out of the reach of children.
– Remove the front trim. ( p. 75)
– Remove the radiator spoiler. ( p. 69)
To Next Page
Loading...
