MAINTENANCE WORK ON THE ENGINE 153
301843-10
– Remove screws 1. Take off the oil filter cover with the O-ring.
301844-11
– Pull oil filter element 2 out of the oil filter case.
Circlip pliers reverse (51012011000)
– Completely drain the engine oil.
– Thoroughly clean parts and sealing area.
16.5Cleaning the oil screen x
Warning
Danger of scalding Engine oil and gear oil get very hot when the vehicle is driven.
– Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under lukewarm water immediately.
To Next Page
Loading...
Need help?
General
