GV 640 Service Manual 39
For internal use only
2. Restore the electrical connections.
6.1.10 Replacing the zeolite container
This is only possible if the container has been folded down and the fan motor and the fan casing
removed.
Cuts on sharp edges: use protective gloves.
Dismounting
1. Disconnect the electrical connections on the
zeolite container.
2. Remove the blow-out cap in the inside of the
rinsing cavity from the bayonet catch in an
anti-clockwise direction.
2
2
2
Please note!
Secure the zeolite container!
When the blow-out cap has been
removed the entire zeolite container
will come loose and will need to be
secured to prevent it from falling
down.
2
To Next Page
Loading...
Need help?
General
