Lantronix SLC 8000 Series User Manual

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 373
diag nettrace
Syntax
diag nettrace <one or more parameters>
Parameters
ethport <1|2>
protocol <tcp|udp|icmp|esp>
host <IP Address or Name>
numpackets <Number of Packets>
verbose <low|medium|high|disable>
pcapfile <File Name> location <usb:sdcard> [usbport <U1:U2>]
Description
Displays all network traffic, applying optional filters (the output can be saved to a Wireshark pcap
file on external storage). This command is available in the CLI but not the web.
diag perfstat
Description
Display performance statistics for an Ethernet Port or Device Port, averaged over the last 5
seconds. Must specify an Ethernet Port or Device Port.
Syntax
diag perfstat [ethport <1|2>] [deviceport <Device Port # or Name>]
diag ping|ping6
Description
Verifies if the SLC can reach a host over the network.
diag ping|ping6 <IP Address or Name> [<parameters>]
Parameters
count <Number Of Times To Ping>
packetsize <Size In Bytes>
ethport <1|2>
Defaults: count=5, packetsize=64
diag sendpacket host
Description
Generate and send Ethernet packets.

Lantronix SLC 8000 Series Specifications

General

Brand	Lantronix
Model	SLC 8000 Series
Category	Switch
Language	English