Parameter setting
Parameter setting with the XT EMZ9371BC keypad
Menu structure
7
7.2
7.2.9
7.2-13
EDSVF9333V EN 3.0-06/2005
DescriptionSubmenusMain menu Description
DisplayDisplay
LECOM/AIF Configuration of operation with communication modules
LECOM A/B Serial interface
AIF interface Process data
Status word Display of status words
System bus Configuration of system bus (CAN)
Management CAN communication parameters
CAN-IN1
CAN object 1
CAN-OUT1
CAN-IN2
CAN object 2
CAN-OUT2
CAN-IN3
CAN object 3
CAN-OUT3
Status word Display of status words
FDO Free digital outputs
Diagnostics CAN diagnostics
FB config Configuration of function blocks
Func blocks Parameter setting of function blocks
The submenus contain all available function blocks
FCODE Configuration of free codes
Identify Identification
Drive Software version of basic device
Op Keypad Software version of keypad
To Next Page
Loading...
Need help?
General
