Temperature information
Operating temperature and relative humidity 15.3 to 32.2°C (60 to 90°F) and 8 to 80% RH
1.1 to 35°C (34 to 95°F) and 8 to 80% RH
Maximum wet-bulb temperature
2
: 22.8°C (73°F)
Non-condensing environment
Printer / cartridge / imaging unit long-
term storage
1
Printer / cartridge / imaging unit short-term
shipping
-40 to 43.3°C (-40 to 110°F)
1
Supplies shelf life is approximately 2 years. This is based on storage in a standard oce environment at 22°C (72°F)
and 45% humidity.
2
Wet-bulb temperature is determined by the air temperature and the relative humidity.
Enabling the security reset jumper
The security reset jumper can reset a printer that is locked due to a forgotten password or lost network
connectivity.
Notes:
• Resetting the printer deletes all security settings.
• Before changing the security settings, ask for permission from your administrator.
1 Turn o the printer.
2 Access the controller board.
3 Move the jumper to cover the middle and exposed prongs.
Note: The small yellow jumper is located beside a lock icon on the controller board.
4 Turn on the printer.
Invalidating the eects of a jumper reset
1 From the Embedded Web Server, click Settings > Security > Miscellaneous Security Settings.
2 From the Security Reset Jumper menu, select No Eect.
Warning: This setting disables access to the security menus of a locked printer. To regain access to the
menus, replace the controller board.
3 Click Submit.
Notes:
• Use a cable lock to secure the controller board and prevent a malicious reset.
• For multifunction products, when the controller board is replaced, the security settings are lost and the
LDAP
configuration
and Copy function are no longer protected.
4064
Printer specifications
858
To Next Page
Loading...
Need help?
General
Weight and Dimensions
