Lightware UMX-TPS-TX100 Series User Manual

 UMX-TPS-TX100 series – User's Manual 137

Sending CEC Commands in Hex Format
ç <port>:sendHex(<hex_code>)
æ <port>:sendHex
Parameters
Parameter Parameter description  
<port> 
port
I1-I4

O1-O2

<hex_code> The desired CEC command Max. 30 character (15 byte) in hexadecimal format.
Example
ç 
æ 

ç <port>
æ <port><CEC_message>
Parameters
Parameter Parameter description  
<port>  I1-I4 or
O1-O2
<CEC_message> The last incoming CEC message
from the connected device.
Example
ç 
æ 
TIPS AND TRICKS:  
sends status information via CEC, it could be a trigger for an action.

INFO:  Infrared input and output port numbering can be found in the Port Numbering section.
Enable Command Injection Mode
Command and Response #commandinjection
ç <port>
æ <port>
Example
ç 
æ 
Enable/Disable Output Signal Modulation
Command and Response
ç <port>
æ <port>
Example
ç 
æ 
Signal modulation is turned off on IR output (D1).
INFO:  The default setting value is "true" (enabled).





Lightware UMX-TPS-TX100 Series Specifications

General

Brand	Lightware
Model	UMX-TPS-TX100 Series
Category	Transmitter
Language	English