11. Appendix
Factory Default Settings
Parameter Setting/Value
Crosspoint settings
Audio I1 (Analog audio in 1)
Video port settings
HDCP Enabled
Autoselect Disabled
Emulated EDID on analog video inputs Factory #89: Universal Analog EDID
Emulated EDID on digital video inputs Dynamic #1: Copy EDID from connected sink device.
Test pattern mode Auto
Test pattern resolution
Test pattern color (RGB code) #7F7F7F (grey)
Test pattern color (RGB code) on Testpattern input
#108020 (green)
Output signal type Auto
Output HDCP mode Auto
Always on
Color space Auto
TPS mode Auto
Analog audio port settings (I1 and I5)
0.00 dB (100%)
Balance 50 (center)
Network settings
IP address
Subnet mask 255.255.255.0
Static gateway
DHCP Disabled
10001
HTTP port number 80
RS-232 settings
Control protocol
Baud rate
Parameter Setting/Value
Databits 8
Parity None
Stopbits 1
Operation mode Pass-through
8001
Command injection port nr. - TPS 8002
IR port settings
Command injection status Enabled
9001
9002
Comm. inj. input port nr. - TPS 9003
Comm. inj. output port nr. - TPS 9004
GPIO port settings
Output level High
Direction Input
To Next Page
Loading...
Need help?
General
