UMX-TPS-TX100 series – User's Manual 79
Network
Network tab in Settings menu
General
IP address and DHCP settings can be set on this tab. Always press the Apply settings button to save changes.
Factory defaults settings can be recalled with a dedicated button.
TCP/IP Ports and Services
DIFFERENCE:
package v1.5.0b4.
The IP Port Block feature is an additional protection for the Cleartext login, see the
Settings)
port no.10001 shall be blocked manually. #dhcp #ipaddress #network #portblock
MAC Filter Allowlist
DIFFERENCE:
package v1.5.0b4.
MAC address which are allowed: #macfilter
▪ Controlling the device (Send option), or
▪
Do not forget to press the Apply changes button to store the new settings.
ATTENTION!
ATTENTION! If the device is installed in a network where it gets IP address from a DHCP server and you
Otherwise, the device will not get IP address and will be unreachable.
Front Panel
Front panel tab in the Settings menu
▪ Lock front panel option.
This is same method of the control lock made by the front panel buttons. See the details in the Control
section. #controllock #buttonlock #lockbutton
▪ Dark mode
enabling the dark mode. #darkmode
▪ Enable default function for Video Select / Audio Select / Function (Show me) button: when this property is
disabled, it means that pushing the button will not perform the original function. This makes the
button free for programming custom function by the Event Manager. This setting is also available via
Disable the Default Function of the Front Panel Buttons section.
To Next Page
Loading...
Need help?
General
