Matrix ETERNITY Quick Start 35
For PPPoE Connection Type, you must configure the PPPoE User ID and
Password provided by the Internet Service Provider.
If you select Static, you must assign the IP Address, Subnet Mask and Gateway
Address to the phone.
IP Address
• If you select Static as Connection Type, enter the static IP Address to be
assigned to the phone.
Enter the desired Static IP Address by pressing the digit keys.
To enter the dot/period in the IP Address, press the digit key ‘1’ twice.
Subnet Mask
• If you select Static as Connection Type, enter the Subnet Mask to be applied on
the phone by pressing the digit keys.
To enter the dot/period in the IP Address, press the digit key ‘1’ twice.
Gateway Address
• If you select Static as Connection Type, enter the Gateway Address here. This
is the IP Address of the LAN Port of the Router.
DNS Server
• If you select Static as Connection Type, select the DNS Server option Static
and configure the DNS Address.
• If you select DHCP or PPPoE as Connection Type and your Internet Service
Provider provides DNS Address, select the DNS Server option Automatic.
However, if your Internet Service Provider does not provide DNS Address,
select Static and configure the DNS Address.
DNS Address
• If you select DNS Server as Static, enter the DNS Address here.
To enter dot/period in the IP Address, press the digit key ‘1’ twice.
To Next Page
Loading...
Need help?
General
