Matrix ETERNITY ME User Manual

62 Matrix ETERNITY Quick Start
• By default members of the OGTBG-01 are TWT, BRI, SIP, T1E1, and Mobile
trunks.
• Go to ‘OG Trunk Bundle’ to form the OG Trunk Bundles as desired.
• Go to ‘OG Trunk Bundle Group’, program the OG Trunk Bundles as members of
the OG Trunk Bundle Group.
• Go to ‘Station Basic Feature Template’ assigned to the station, to assign
different OG Trunk Bundle Groups for different Trunk Access Codes.
LCR
• By default, LCR is disabled on all the OG Trunk Bundle Groups.
• To enable LCR Type, go to ‘OG Trunk Bundle Group’ - LCR Type.
• Click the links of Least Cost Routing to program attributes of the LCR.
Trunk Landing
• Routing the incoming call to Trunk Landing Group
• By default all the trunks are assigned trunk landing group (Routing Group)
01.
• By default members of the default Routing Group 01, are DKP 001, SLT 001
and SLT 002.
• Go to ‘Routing Groups’ to program the routing groups with desired
members.
• To assign the Routing Group you programmed to the trunks, go to ‘Trunk
Feature Template’ and assign the routing group to trunks for working hours,
break hours and non working hours.
DID (Direct Inward Dialing)
• By default DID is disabled on all the trunks for working hours, break hours and
non-working hours.
• To enable DID, go to ‘Trunk Feature Template’ and enable the DID for working
hours, break hours and non-working hours as desired.

Matrix ETERNITY ME Specifications

General

Brand	Matrix
Model	ETERNITY ME
Category	PBX
Language	English