Matrix ETERNITY ME User Manual

Matrix ETERNITY Quick Start 61
• Stations can be provided different COS groups by assigning them different
Station Basic Feature Templates.
• Go to ‘SLT Parameters’ to change Station Basic Feature Template assigned to
SLT Ports.
• Go to ‘DKP Parameters’ to change Station Basic Feature Template assigned to
DKP Ports.
• Go to ‘ISDN Terminal Parameters’ to change Station Basic Feature Templates
assigned to ISDN Terminals.
Toll Control
• Toll Control is part of the Station Basic Feature Template. By default all stations
are assigned Station Basic Feature Template-01.
• By default, all the stations are assigned Toll Control Level - 0 (default Call
Privilege: International Calls) for working hours, break hours and non-working
hours. All stations can make calls as per the allowed and denied number
strings programmed in ‘International Numbers’.
• Go to ‘Regional Settings’, check and change the default settings of ‘International
Numbers’, if required.
• You may also assign Call Privilege as No Calls, Local Calls, Regional Calls,
National Calls and Limited Calls as Toll Control Level 0 to 3. Program the
allowed and denied number strings as per the call privilege type you have
selected for the Toll Control Level, under ‘International Numbers’, ‘Local
Numbers’, ‘Regional Numbers’ and ‘National Numbers’.
• If you have selected ‘Limited Calls’ as the Call Privilege, go to ‘Number List’,
program the Allowed and Denied Number strings in the respective list and
assign the list numbers in the Station Basic Feature Template. By default all the
stations are assigned Station Basic Feature Template - 01.
Trunk Access
• Trunk Access is part of Station Basic Feature Template; by default all stations
are assigned Station Basic Feature Template-01.
• By default all stations are assigned Outgoing Trunk Bundle Group (OGTBG)-01.

Matrix ETERNITY ME Specifications

General

Brand	Matrix
Model	ETERNITY ME
Category	PBX
Language	English