106
Control systems
COMAND FM/AM radio
Saving stations
You have the following options:
앫 Saving stations manually
앫 Saving stations using Autostore
Saving stations manually
Option 1
왘 Select “Audio” “Audio” “FM/AM
Radio” “FM” or “AM”.
왘 Select “Radio ” “Save Station”.
Option 2
왘 Press n when the main area is select-
ed.
Option 3
왘 Select “Audio” “Audio” “FM/AM
Radio” “FM” or “AM”.
왘 Select “Presets”.
All three of these will call up a station pre-
set screen. The dot R in front of a preset
position indicates that the currently select-
ed station is saved there.
왘 Selecting a preset position:
Slide qmr or rotate ymz.
Saving a station to a selected preset po-
sition
If you have called up the station preset
screen using option 1:
왘 Press n briefly.
In options 2 and 3:
왘 Press and hold n until you hear a sig-
nal.
The station is saved.
Saving using autostore
Option 1
왘 Press n when the main area is select-
ed.
왘 Select “Autostore”.
i
Twenty stations can be saved in each wave-
band except for Weather Band.
i
This function is not available for Weather
Band. The Autostore function saves receivable
stations as presets in order of their reception
quality. All stations saved manually in the preset
memory will be lost if COMAND finds 20 sta-
tions. If COMAND finds less than 20 stations, for
example 9, then the stations saved in preset po-
sitions 1 – 9 will be over written.
To Next Page
Loading...
Need help?
General
