64
Safety and Security
Occupant safety
왘 Bring the rear power seat backrest* to
its fully upright position (
컄 page 375).
왘 Fold upholstery cover 3 upward.
왘 Turn installation device 4 to a vertical
position so that upholstery cover 3
does not fold down.
왘 Install child seat according to the man-
ufacturer’s instructions.
A rigid connection is established be-
tween the child seat and the body of
the vehicle.
Override switch for rear passenger
compartment
You can disable select functions in the rear
passenger compartment for added safety
(for instance when you have children riding
in the rear passenger compartment).
You can disable the following functions in
the rear passenger compartment:
앫 rear door window operation
(
컄 page 410)
앫 adjustment of front passenger seat
from the rear* (
컄 page 376)
앫 rear center console lighter
(
컄 page 537)
앫 sunblinds for panorama roof*
(
컄 page 521)
앫 rear window sunshade (컄 page 535)
and rear side window sunshades
(
컄 page 412)
Warning! G
Vehicles with rear power seats*: Never ad-
just the rear seat position after installing the
child restraint. Adjusting the rear seat posi-
tion after installing the child restraint could
damage the child restraint and/or introduce
undesirable slack or tension into the seat
belt and loosen or misposition the child re-
straint, lessening the effectiveness of the
child restraint and thus increasing the
chance or severity of injury in an accident.
i
The child seat must be firmly attached to the
right and left side anchor fittings.
Make sure the seat belt for the center seat can
operate freely with a child seat installed.
Non-LATCH type child seats may also be used
and can be installed using the vehicle’s seat belt
system. Install child seat according to the manu-
facturer’s instructions.
컄컄
To Next Page
Loading...
Need help?
General
