249
Control systems
COMAND navigation system (real-time traffic)
The following shows the possible symbol
displays.
1 Traffic jam on the route (symbol with
red border)
2 Traffic jam away from the route (sym-
bol with gray border)
3 Stop and go traffic on the route (sym-
bol with red border)
4 Stop and go traffic away from the route
(symbol with gray border)
5 Blocked section on the route
6 Traffic jam
7 Stop and go traffic
Displaying real-time traffic reports
Displaying the message list
왘 Select “Navi” “Traffic”.
COMAND searches for real-time traffic
transmitters. When no traffic reports
are present, you will see a display to
this effect.
List for inactive route guidance
When route guidance is inactive, the list
displays all streets for which messages are
present.
1 Affected street list
왘 Read a message: Select a street.
You can find an example message on
(
컄 page 250).
왘 Close the list: Slide omp.
i
Instead of a street, an area or a region can
also be affected by a message, for example,
when visibility is limited due to fog.
To Next Page
Loading...
Need help?
General
