403
Controls in detail
Lighting
Rear fog lamp (driver’s side only)
왘 Turn the exterior lamp switch to
position B (
컄 page 399).
왘 Pull out exterior lamp switch to second
stop.
The front fog lamps and the rear fog
lamp switch on.
The yellow indicator lamp † in the
exterior lamp switch comes on
(
컄 page 399).
왘 Push in the exterior lamp switch to first
stop.
The rear fog lamp switches off.
The yellow indicator lamp † in the
exterior lamp switch goes out.
The front fog lamps remain lit.
High beam
Combination switch
1 High beam
2 High beam flasher
왘 High beam headlamps: Turn the exte-
rior lamp switch to position B
(
컄 page 399).
왘 Push the combination switch in the di-
rection of arrow 1.
The high beam indicator A in the in-
strument cluster comes on
(
컄 page 28).
왘 High beam flasher: Pull the combina-
tion switch briefly in the direction of
arrow 2.
Headlamp cleaning system
With the engine running the headlamps will
automatically be cleaned with a high-pres-
sure water jet when you have
앫 switched on the headlamps
and
앫 the windshield wipers have wiped the
windshield with washer fluid five times
When you switch off the ignition the
counter resets.
For information on filling up the washer
reservoir, see “Windshield washer system
and headlamp cleaning system”
(
컄 page 580).
To Next Page
Loading...
Need help?
General
