393
Controls in detail
Memory function
Each stored position on the passenger side
includes the following settings:
앫 Seat position and lumbar support
앫 Multicontour seat*: previously saved
setting
앫 Drive-dynamic multicontour seat*: ac-
tivation/deactivation
Each stored position in the rear passenger
compartment includes the following set-
tings (Canada only):
앫 Seat position
앫 Multicontour seat*: previously saved
setting
M Memory button
1 2 3 Memory position buttons
Storing positions into memory
왘 Adjust the seat (컄 page 373) to the de-
sired position.
왘 On the driver’s side: Adjust the steering
wheel (
컄 page 386) and the exterior
rear view mirrors (
컄 page 388) to the
desired position.
왘 Press memory button M.
왘 Release memory button M and press
one of the memory position buttons
within 3 seconds.
All the settings are stored with the se-
lected position.
Recalling positions from memory
왘 Press and hold one of the position
buttons until the seat, steering wheel
and exterior rear view mirrors have fully
moved to the stored positions.
!
Do not operate the power seats using the
memory button if the seat backrest is in an ex-
cessively reclined position. Doing so could cause
damage to front or rear seats.
First move seat backrest to an upright position.
i
Releasing the button immediately stops
movement to the stored positions.
The multicontour seat* and/or lumbar support
will continue to be adjusted.
To Next Page
Loading...
Need help?
General
