150
Control systems
COMAND telephone*
Call lists
COMAND can display the following calls in
separate lists:
앫 Calls received
앫 Calls dialed
Calling up a list
왘 Select “Call Lists” from main telephone
menu.
왘 Select “Calls Received” or “Calls Di-
aled”.
The corresponding list appears.
Illustration: list of calls received
1 To close list
2 To switch list display (“123” or “ABC”)
3 To call up options
4 Name or telephone number of a caller
5 Unknown caller
6 Telephone number of a caller
왘 Switching to list display: Select
“123” or “ABC”.
The display changes to telephone num-
ber or name display.
왘 Closing list: Slide omp and
select “Back”.
왘 Selecting a list entry: Slide qmr or
rotate ymz and select entry.
i
The list of incoming calls contains received
calls as well as missed calls.
i
The “Calls Received” and “Calls Dialed”
menu items do not function if the respective list
has no entries.
The “Call Lists” menu item does not function if
neither list has any entries.
i
In the list of calls received, you will see the
name of caller 4 if
앫 the caller transmitted the telephone number
앫 the name and telephone number are saved
in the COMAND address book or in the
phone book on the mobile phone
앫 the telephone number is saved in the same
way in which the caller transmits it
You will see the telephone number of caller 6 if
앫 the caller transmitted the telephone number
앫 no caller data is saved in either the COMAND
address book or the phone book on the mo-
bile phone
An unknown caller 5 has not transmitted his or
her telephone number.
i
In the list of dialed calls, you will see the
name of the person called if you have saved his
or her telephone number and name in the
COMAND address book or in the phone book on
the mobile phone. If no data has been saved, you
will see the telephone number.
To Next Page
Loading...
Need help?
General
