263
Control systems
COMAND system settings
Assigning the favorite button
1 Favorite button
You can assign the following predefined
functions to the favorite button P:
앫 “Rear Window Sunshade” (컄 page 535)
You can use the favorite button to ex-
tend or retract the rear window sun-
shade. This is the default setting.
앫 “Display OFF” (컄 page 259)
You can use the favorite button to
switch the COMAND display on or off.
앫 “Repeat Navigation Command”
(
컄 page 243)
You can use the favorite button to re-
call the last announcement issued by
the navigation system.
왘 Select “Vehicle” “System Settings”
“Favorite”.
The list of predefined functions appears.
The dot R in front of the list entry indi-
cates the current setting.
왘 Changing setting: Rotate ymz and
select desired function.
왘 Saving setting and exit the menu:
Press n.
Reset
왘 Select “Vehicle” “System Settings”
“Reset”.
A prompt appears asking whether you
really want to reset.
왘 Select “Yes” or “No”.
If you select “Yes” another prompt will
appear asking whether you really want
to reset.
왘 Select “Yes” or “No”.
If you select “Yes”, COMAND will be re-
set and restarted.
i
You can reset COMAND back to its factory
settings.
In this case, all personal data (e.g. address book
entries, entries in the destination memory and
the list of last destinations of the navigation sys-
tem), among other things, is deleted.
To Next Page
Loading...
Need help?
General
