268
Control systems
COMAND vehicle menu
Activating easy-entry/exit feature
Use this function to activate and deacti-
vate the easy-entry/exit feature
(
컄 page 384).
The following settings are available for the
easy-entry/exit feature:
왘 Select “Vehicle”.
The main area is active.
왘 Selecting “Easy Entry/Exit Feature”
menu: Slide omp or rotate ymz.
왘 Confirming selection: Press n.
or
왘 Select “Vehicle” “Vehicle” “Easy
Entry/Exit Feature”.
i
The components and operating principles of
COMAND can be found on (
컄 page 87).
OFF The easy-entry/exit
feature is deactivated.
Steering Column
& Seat
Both the steering col-
umn and the driver’s
seat are moved.
Warning! G
You must make sure no one can become
trapped or injured by the moving steering
wheel and driver’s seat when the easy-en-
try/exit feature is activated.
To stop seat/steering wheel movement, do
one of the following:
앫 Press seat adjustment switch
(
컄 page 374).
앫 Move steering wheel adjustment stalk
(
컄 page 386).
앫 Press one of the memory position but-
tons or the memory button M
(
컄 page 393).
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
To Next Page
Loading...
Need help?
General
