246
Control systems
COMAND navigation system (during route guidance)
Displaying route information
왘 Select “Route” “ Route Info” in map
view with the menu system displayed
(
컄 page 196).
The route information appears.
Example display route information
1 Highlighted portion of route
2 Info for highlighted portion of route
3 Next portion of route
왘 Closing route info: Slide omp or
press back button L in the center
console (
컄 page 88).
왘 Displaying next or previous route
section: Select “Next” or “Previous”.
왘 Increasing or reducing size of the
map: Select ; or :.
왘 Closing route browser:
Select “Back”.
Detour function
왘 Select “Route” “Detour” in map view
with the menu system displayed
(
컄 page 196).
The detour function display appears.
왘 Setting length of the blockage:
Select “More” or “Less” until the de-
sired length is set.
i
The detour function blocks a section of the
route ahead of you. You can set the length of the
blockage. If possible, COMAND calculates a de-
tour route.
i
The detour function may direct you to
off-road routes. See Off-road and Off-map for ad-
ditional routes and cautions (
컄 page 241).
To Next Page
Loading...
Need help?
General
