145
Control systems
COMAND telephone*
“911” emergency call
The following conditions must be fulfilled
in order to make a “911” emergency call:
앫 The phone is switched on.
앫 A mobile network is available.
앫 There is a valid SIM card in the phone
(not necessary in all mobile networks).
If you cannot make an emergency call, you
must initiate rescue measures yourself.
The “911” emergency call is a public ser-
vice. Any misuse is punishable by law.
Placing a “911” emergency call before
entering PIN/PIN2, PUK/PUK2 or un-
lock code
Entering the number using the COMAND
controller
왘 Select “Telephone” “Dial 911”.
Entering the number using the tele-
phone keypad
왘 Enter digits 9-1-1 (컄 page 144).
왘 Press s.
Placing a “911” emergency call after
entering PIN/PIN2, PUK/PUK2 or un-
lock code
Entering the number using the COMAND
controller
왘 Select “Telephone”.
왘 Select all the digits in sequence.
왘 Select “S”.
Entering the number using the tele-
phone keypad
왘 Enter digits 9-1-1 (컄 page 144).
왘 Press s.
i
The “911” emergency call system is a public
service. Using it without due cause is a criminal
offense.
i
This function places a call to the local 911
provider. It does not initiate a Tele Aid call.
i
If no SIM card is inserted in the mobile
phone, you can only initiate a “911” emergency
call by using COMAND and the mobile phone.
i
The roof cargo container* may impair mo-
bile phone reception. In an emergency, remove
the mobile phone from the mobile phone cradle
(
컄 page 539) to make a call.
To Next Page
Loading...
Need help?
General
