279
Control systems
COMAND automatic climate control
Adjusting air flow from air vents
The “Airflow” setting defines air distribu-
tion and air volume in automatic mode:
앫 “Focused” (default setting, increased
air flow)
앫 “Medium” (reduced air flow)
앫 “Diffuse” (minimal air flow)
왘 Select climate control settings Cen-
tral climate control menu “Airflow”.
A selection list appears.
The current setting is indicated by a
dot R.
왘 Changing air flow: Slide qmr or
rotate ymz.
왘 Confirming selection: Press n.
Operating rear climate control* from
the front
The “Rear)” function is used to oper-
ate the rear climate control via COMAND
and the buttons on the center console con-
trol unit (
컄 page 510).
Switching on rear climate control oper-
ation from the front
왘 Select climate control settings Cen-
tral climate control menu.
왘 Selecting “Rear)”: Slide qmr or
rotate ymz.
왘 Confirming selection: Press n.
i
In automatic mode, this setting optimizes
the air flow when outside temperatures are high.
i
When the interior ambient temperature of
the vehicle is very hot and the automatic climate
control is cooling the interior, the setting for air
flow is temporarily overridden.
컄컄
To Next Page
Loading...
Need help?
General
