129
Control systems
COMAND AUX
왔 COMAND AUX
You can connect an external audio or video
source (AUX) to COMAND.
Audio and Video AUX jacks
The Audio and Video AUX jacks to which
external audio/video sources can be con-
nected are located in the glove box.
1 Video AUX jack
2 Audio AUX jack
Audio AUX
Switching to Audio AUX mode
왘 Select “Audio” “Audio” “AUX”.
The Audio AUX menu appears. You will
hear the medium in the external audio
source if it has been connected and
switched to play.
You can adjust the following settings in Au-
dio AUX mode:
앫 Volume (컄 page 98)
앫 Balance and fader (컄 page 100)
앫 Treble and bass (컄 page 99)
앫 Surround sound (컄 page 100)
i
Please refer to the corresponding operating
instructions for information about how to oper-
ate the external audio source.
To Next Page
Loading...
Need help?
General
