130
Control systems
COMAND AUX
Video AUX
Automatic picture fade-out
If a video is playing when the vehicle is
shifted from park position P into neutral
position N, drive position D or reverse
gear R the picture is faded out automati-
cally and the following message appears in
the display: “In order not to distract driver,
picture is faded out while the vehicle is in
motion”.
When the vehicle is shifted back into P, the
picture comes on again.
Switching to Video AUX mode
왘 Select “Video” “Video” “AUX”.
The Video AUX menu appears. You will
see the medium in the external audio
source if it has been connected and
switched to play.
You can adjust the following settings in
Video AUX mode:
앫 Screen settings (컄 page 130)
앫 Volume (컄 page 98)
앫 Balance and fader (컄 page 100)
앫 Treble and bass (컄 page 99)
앫 Surround sound (컄 page 100)
Screen settings
Setting brightness, contrast and color
왘 Show the menu system, if necessary
(
컄 page 135).
왘 Select “Video” “AUX” “AUX”.
The menu appears.
왘 Select a setting: Slide qmr or turn
ymz.
왘 Press n.
i
Please refer to the corresponding operating
instructions for information about how to oper-
ate the external video source.
To Next Page
Loading...
Need help?
General
