304
Control systems
Instrument cluster control system
The following settings are available: Switching on or off Blind Spot Assist*
왘 Press ( or & to select the
“Assistance” menu.
왘 Press % or $ to select the “Blind
Spot Assist” function.
왘 Press #.
왘 Press # again if you would like to
change the current status.
Service menu
The “Service” menu is used for
앫 calling up messages
앫 checking tire inflation pressure elec-
tronically with the Advanced TPMS
앫 calling up the maintenance service in-
dicator display
앫 check engine oil level*
Calling up vehicle malfunction, warning
and system status messages stored in
memory
Use the vehicle status message memory
menu to scan malfunction and warning
messages that may be stored in the sys-
tem. Such messages appear in the multi-
function display and are based on
conditions or system status the vehicle’s
system has recorded.
“On when in
Reverse”
The Rear View Camera au-
tomatically switches on
when reverse gear is en-
gaged.
“Disabled” The Rear View Camera is
not switched on.
i
The menu overview can be found on
(
컄 page 289).
컄컄
To Next Page
Loading...
Need help?
General
