Chapter 6 Maintenance and Storage of the Device
118
6.2 Storing the Product
Note the following precautions when storing this product.
• Store this product in a dry location where mold is unlikely to form.
• Store this product in a temperature range of -20 to +60°C with a relative humidity of up to 90% (no
condensation).
• Store objectives and eyepieces in a desiccator or other vessel that contains a desiccant.
• Place a dust cover over this product to protect it from dust.
• Do not cover this product unless the power switch on the main body of the microscope has been turned off
(set it to “o”) and the lamphouse becomes sufficiently cool to touch (for approximately 30 minutes).
6.3 Regular Inspection (Charged)
To maintain the performance of this product, Nikon recommends periodic inspections (chargeable service).
To Next Page
Loading...
Need help?
General
