Nordson ProBlue Flex User Manual

Troubleshooting
6-22
Part 1128350_02
E 2020 Nordson Corporation
Access the Components
See Figures 6-5 and 6-6.
1. Remove the four screws that secures the melt section bracket from the
chassis.
2. Fold the melt section bracket to a horizontal position. If required, remove
from the chassis.
3. Unfasten the adhesive strips that securetheinsulationandthenfoldthe
insulation down.
1
2
Figure 6-5 Melt section bracket and insulation
1. Bracket 2. Insulation

Nordson ProBlue Flex Specifications

General

Brand	Nordson
Model	ProBlue Flex
Category	Melting Machines
Language	English