Installation
3-17
Part 1128350_02
E 2020 Nordson Corporation
Configure the Electrical Service
ProBlueFlexadhesivemeltersareshippedfromthefactorywithoutan
attached power cable, an electrical service type specified, and Nordson
recommended voltage plug. Be sure to order these items prior to making
electrical connections.
Melter Power Requirements
CAUTION! The following tables are specific to melters without transformers.
Melters using optional transformers are limited to 3 kVA for external
hose/applicators.
The ProBlue Flex 400/480 volt melters include a transformer assembly that is
shipped separately from the melter. Refer to ProBlue Flex 400/480 Volt
Transformer (Appendix F) for installation instructions, parts information, and
wiring details.
4 Kg Tank (T04, X04)
Y
37
N/A
24
30
36
20
N/A
Voltage (VAC)
2H/A
Legacy
Fast Warm Up
Maximum Amperage
4 H/A 6 H/A 8 H/A 4 H/A 6 H/A
200-240, 1-phase
200-240, 3-phase
400-230, 1-phase
400-230, 3-phase
19
13
18
10
28
21
27
14
N/A
28
N/A
18
14
35
22
34
14
8H/A
N/A
N/A
34
20
2H/A
26
19
25
11
To Next Page
Loading...
Need help?
General
