Description
2-5
Part 1128350_02
E 2020 Nordson Corporation
Intended Use
Observe the safet y instructions priortousingtheProBlueFlexadhesive
melter. Nordson recommends obtaining detailed information on the materials
to be used. Nordson will not be liable for personal injury or property damage
resulting from unintended use.
The ProBlue Flex adhesive melter is designed to be used:
S Only to melt and convey suitable materials, such as thermoplastic hot
melt adhesives
S With compatible equipment manufactured by Nordson Corporation
S In non-explosive environments
Limitations of Use
UsetheProBlueFlexadhesivemelteronlyforthepurposeforwhichitis
designed. The melter should not be used:
S In a defective condition
S With the electrical cabinet door open
S With the tank lid open
S In a potentially explosive atmosphere
S When the melter is not in compliance with the re lated specifications
The melter may not be used to process the following:
S Polyurethane hot melt adhesive (PUR) or thermoplastic with melt
index (extruder based materials)
S Explosive and flammable materials
S Erosive and corrosive materials
S Food products
Electromagnetic Compatibility (EMC)
The ProBlue Flex adhesive melter is intended for use in industrial
applications.
When operated in residential or commercial areas, the melter may cause
interference in other electrical devices.
To Next Page
Loading...
Need help?
General
