Maintenance
5-3
Part 1128350_02
E 2020 Nordson Corporation
Locking Out External Communications
WARNING! Disable external inputs and field-bus communications (if
installed)withthemelterbeforeperformingmaintenance.Failuretodisable
external inputs or field-bus communications with the melter can result in
personal injury due to unexpected operation of the melter while performing
maintenance.
Cleaning the Melter
To prevent components from overheating due to heat build-up or loss of air
circulation, regularly remove any hot melt that collects on the exterior of the
melter, hoses, and applicators.
If hot melt inadvertently spills inside the pump compartment or other interior
spaces, the exterior panels can be removed in order to clean out the spilled
hot melt.
WARNING! Risk of electrocution and fire! Do not clean the melter with a
direct stream of water or steam. Use only wate r or an appropriate,
non-flammable cleaning solution that is a pplied using a clean cloth. Cleaning
the melte r using a direct stream of water or steam or a flammable solvent can
result in property damage and personal injury, including death.
To Next Page
Loading...
Need help?
General
