Basic Melter Operation
4-7
Part 1128350_02
E 2020 Nordson Corporation
DescribingtheHomeScreen
After the Commissioning Setup Wizard process is complete, the Home
screen appears.
NOTE: On subsequent melter power-up, the Home screen appears after the
system completes a self-check.
Temperature
Event Logs
Tank Level/Fill Level
System Settings
Figure 4-3 Home screen
Refer to the accompanying User Interface Quick Reference Guide
(P/N 1128354) for an overview of how to use the OLED user interface and
the menu structure.
The melter can be customized with several set up options. For detailed
instructions on how to set up the menus for specific and advanced melter
operating tasks, refer to one of the following manuals:
- ProBlue Flex Adhesive Melter Using the OLED User Interface Manual
(P/N 1128351).
- ProBlue Flex Adhesive Melter OEM User Interface Manual
(P/N 1129255).
To Next Page
Loading...
Need help?
General
