Maintenance
5-4
Part 1128350_02
E 2020 Nordson Corporation
Clean the Exterior of the Melter
S Use citrus-based cleaning compounds that are compatible with polyester,
or use any of the following Nordson recommended cleaning agents:
Part Number Description
7334087 CLEANER C ODORLESS, 12-PCK 0.5l, NON-HZD
7334088 CLEANER C ODORLESS, 4-PCK 0.5L, NON-HZD
7334104 CLEANER C NF, 4-PACK 0.5L, NON-HAZARDOUS
7334112 CLEANER C NF,12-PACK 0.5L, NON-HAZARDOUS
S Apply cleaning compounds using a soft cloth.
S Do not use pointed or sharp tools to clean the exterior surface.
Servicing the Pump
For comprehensive pump diagnostic and repair information, refer to SP
Pump Diagnostics and Repair (Appendix B).
Supplies
The following table describes the lubricants and other compounds that are
required during the re-assembly of the pump. Lubricants and other
compounds are indicated in the illustrations by the symbols shown in
Table 5-2.
Table 5-2 Lubricants and Compounds
Description Part Number Symbol
Never-Seezt 900344
O-Ring Lubricant 1120201
Loctite 272t
Threadlocking Adhesive
900470
SP Lubricating Oil 1120290
Type-R Fluid (1 gal) 270755 --
To Next Page
Loading...
Need help?
General
