Description
2-4
Part 1128350_02
E 2020 Nordson Corporation
Product Description
The ProBlue Flex adhesive melters are used in conjunction with Nordson hot
melt hoses and applicators to create a complete hot melt application system.
The melter liquifies solid-form hot melt and maintains the hot melt at the
desired temperature. When the applicators are activated, the melter pumps
the liquified hot melt through the hoses and out the applicator nozzles, where
it is commonly applied to the surface of a product or package.
2
1
3
4
Figure 2-4 Basic hot melt system
1. ProB lue Flex melter 2. Hose 3. Applicator 4. Solenoid connects to
parent machine or
Nordson controller
ProBlue Flex Melters with Melt-on-Demand (MOD)
The MOD melters are tankless with an automated fill system. This integration
enables hot melt adhesive application to be delivered on demand.
To Next Page
Loading...
Need help?
General
