Nordson ProBlue Flex User Manual

Hose/Applicator Expansion Base
G-2
Part 1128350_02
E 2020 Nordson Corporation
Overview (contd)
For general melter setup, operation, troubleshooting, and parts i nformation,
refer to the sections given earlier in the manual.
Safety
Before installing or operating the expansion base or melter, read the safety
informationprovidedintheSafety (Section 1) given earlier in the manual.
Intended Use
The expansion base can only be used with ProBlue Flex melters.
Unintended Use
S Single-phase operation
S Water wash-down environments
S Explosive atmospheres
Melter Firmware Requirements
Operation of the expansion base requires that melter firmware version 2.000
or later be installed in the melter. Firmware updates are available from
www.enordson.com/support.
Installation
WARNING! Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
Before installing the expansion base, familiarize yourself with Installation
(Section 3) of the melter manual.

Nordson ProBlue Flex Specifications

General

Brand	Nordson
Model	ProBlue Flex
Category	Melting Machines
Language	English