Oki B430 User Manual

4. ADJUSTMENT
43984801TH Rev.1
84 /
Oki Data CONFIDENTIAL
4.1.4 Environment mode setting
As environment mode,
"
NORMAL MODE
"
MODE1 and
"
HIGH TEMPERATURE ENVIRONMENT MODE
"
MODE2 are equipped.
If set this mode to
"
HIGH TEMPERATURE ENVIRONMENT MODE
"
, at duplex printing, fusing control
temperature changes to the lower temperature setting than
"
NORMAL MODE
"
.
Due to the
"
HIGH TEMPERATURE ENVIRONMENT MODE
"
setting, it can be expected that the following
problem being improved at duplex printing.
•
Wrinkle / Curl / Stacking / Toner peeling of stacking paper due to toner re-depositing phenomenon
At factory default, it is
"
NORMAL MODE
"
MODE1.
1. Setting method
(1) Switch on the power of printer.
(2) After “ON LINE” displayed, open Upper Cover.
(3) Press [ON LINE] switch for 5 second.
Open the Top Cover by ONLINE and NODATA status, press [ON LINE] switch for 5 second. The
following setting information displays on LCD for 2 second. Then it returns to the original display
automatically. Attention LED blinking.
•
In case of setting converted by MODE1
"
NORMAL MODE
"
status, it changes to MODE2
"
HIGH
TEMPERATURE ENVIRONMENT MODE
"
.
ENGINE CONTROL
MODE2 *
•
In case of setting converted by MODE2
"
HIGH TEMPERATURE ENVIRONMENT MODE
"
status, it
changes to MODE1
"
NORMAL MODE
"
.
ENGINE CONTROL
MODE1 *
2. Confirming method
※
Con
firm by the setting value of the following information of MenuMap (Left 8th of ET information)
"PU version : 00.00.C4 [ Pl02.08 T200.00.03 ] ET:xxxxxxx
4"
↑ ↑
Confirming position
Setting value of each mode
At NORMAL MODE: 0 (Default)
At HIGH TEMPERATURE ENVIRONMENT MODE: 4
Only display at the 2nd
Tray implementing

Oki B430 Specifications

General

Brand	Oki
Model	B430
Category	Printer
Language	English