To Next Page

To Previous Page

5. Periodic Maintenance

43984801TH Rev.1

87 /

Oki Data CONFIDENTIAL

5.2 Cleaning

Remove toner powder and dust in the printer inner section. Clean the inside of and the periphery of the

printer with the cloth as needed. Clean the printer inner section with the handy cleaner (maintenance

tool).

Note! Do not touch the image drum, LED lens array, and LED head terminal.

5.2.1 Cleaning of LED lens array

If the vertical white lines, and white belt (white spot, pale printing) occur in printing as shown below, the

LED lens array should be cleaned or the toner cartridge should be replaced.

Note! As for the LED lens array, clean it with soft tissues or soft cloth after eliminating static

lectricity of a maintenance tool.

5. Periodic Maintenance

While lines or White belt

(White spot, pale printing)

5.1 Periodic Replacement Parts

The following parts should be replaced at a speciﬁed cycle.

Name Conditions Cleaning Remarks

• Toner Cartridge After printing approx. 3,500

pages

• LED head Consumables

• Image Drum Cartridge After printing approx. 25,000

pages

See 1.4 (15).

Consumables

Note! After using a normal cartridge, the starter toner cartridge (attached at the printer purchase)

can not be used. Use the starter toner cartridge ﬁrst, and then, use the normal toner after

[LOW TONER] is displayed.

Oki B430 User Manual

Questions and Answers: