Olympus ESG-410 User Manual

19
Product description
3 Product description
This chapter provides a general overview of the product and its functions. This includes the
following information:
‒ Scope of delivery
‒ Product functions
‒ Operating elements
‒ Explanation of symbols and icons
‒ Warranty information
3.1 Scope of delivery
Before use, check that all items listed below are available.
Contact an Olympus representative or an authorized service center if any items are missing
or damaged.
‒ 1 Electrosurgical generator ESG–410
‒ 1 Instructions for use, including contact information sheet for customers
‒ 1 Quick Reference Guide “Sockets and screens”
‒ 1 Quick Reference Guide “Foot switches, neutral electrodes and procedures”
‒ 1 Quick Reference Guide “Mode lookup table”
‒ 1 Maintenance Manual for the regular safety check
3.2 Product functions
3.2.1 Operating principles
The electrosurgical generator ESG-410 is designed to be used for the following
electrosurgical applications:
‒ Bipolar electrosurgical cutting and coagulation.
‒ Monopolar electrosurgical cutting and coagulation, which requires a neutral electrode.
The several cutting and coagulation modes are designed for procedures in open,
laparoscopic and endoscopic surgery. All settings of the device are selected via the
touchscreen on the front panel.
The ESG-410 is activated either via a compatible foot switch or via a hand switch at the
connected instrument.
The ESG-410 is connected to the local power supply.
Details on the hardware and software, on the correct handling and use of the device are
described in the following chapters.
3.2.2 Features
The electrosurgical generator is equipped with the following features:
‒ Contact Quality Monitor (CQM)
‒ High Power Cut Support (HPCS)

Olympus ESG-410 Specifications

General

Brand	Olympus
Model	ESG-410
Category	Portable Generator
Language	English