Chapter 5 Operation
131
VISERA VIDEO SYSTEM CENTER OTV-S7V
Deleted user setting cannot be restored.
5.18 Load user settings
User settings can be loaded by controlling the menu switches or the keyboard
(optional).
When using the ENF-V, CYF-V/VA or HYF-V, loading the
“<8>” settings is recommended. The “<8>” settings are given
in Table 5.8 below.
Table 5.8
1. Depress the menu switch “ ” for approximately 1 second or the “F1” key
on the keyboard to display the menu.
By pressing the “F8” key on the keyboard, you can jump to
step 4.
2. Depress the menu switches “ ” or “ ”, or the “///” key on the
keyboard to move the arrow “ ” to “PRESET” (see Figure 5.70).
3. Depress the menu switch “ ” or the “Enter” key on the keyboard to display
the next menu.
4. Depress the menu switches “ ” or “ ”, or the “///” key on the
keyboard to move the arrow “ ” to “LOAD”.(see Figure 5.80).
Function Setting
Remote control
switches
SW1: FREEZE
SW2: ENHANCE
SW3: ZOOM
SW4: RELEASE
REL.+DIG. CAP.
When using a type A or D
OTV-S7V
When using a type B, C or F
OTV-S7V
Other functions Default OTV-S7V settings
To Next Page
Loading...
Need help?
General
