Omron NX701-1620 User Manual

Precautions for Correct Use
16
NJ/NX-series Database Connection CPU Units User’s Manual (W527)
Precautions for Correct Use
This section describes the precautions for correct use in the DB Connection Service.
Refer to the following manuals for other precautions for correct use.
• NX-series CPU Unit Hardware User’s Manual (Cat. No. W535)
• NJ-series CPU Unit Hardware User’s Manual (Cat. No. W500)
For precautions for correct use on NJ501-4320, please contact our sales representative and check
with the product specification document or other documentation.
• For the NJ-series CPU Unit, when the Spool function is enabled, the DB Connection Service uses
the following EM Banks according to the CPU Unit model. If the EM banks are used for processes
other than the DB Connection Service, the Spool data in the EM Banks will be overwritten. Do not
use the EM Banks that are used by the DB Connection Service for processes other than the DB
Connection Service.
NJ501-20: EM Bank No. 9 to 18 (E9_00000 to E18_32767)
NJ101-20: EM Bank No. 1 to 3 (E1_00000 to E3_32767)

Omron NX701-1620 Specifications

General

Brand	Omron
Model	NX701-1620
Category	Controller
Language	English