Omron NX701-1620 User Manual

Related Manuals
23
NJ/NX-series Database Connection CPU Units User’s Manual (W527)
Related Manuals
The following manuals are related to this manual. Use these manuals for reference.
Manual name
Cat. No.
Model numbers
Application
Description
NX-series CPU Unit
Hardware User’s Manual
W535
NX701-

Learning the
basic
specifications of
the NX701 CPU
Units,
including
introductory
information,
designing,
installation,
and
maintenance.
Mainly hardware
information is
provided.
An introduction to the entire NX701 system is
provided along with the following information on
the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NJ-series CPU Unit
Hardware User’s Manual
W500
NJ501-

NJ301-
NJ101-
Learning the
basic
specifications of
the NJ-series
CPU Units,
including
introductory
information,
designing,
installation, and
maintenance.
Mainly hardware
information is
provided.
An introduction to the entire NJ-series system is
provided along with the following information on
the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and inspection
NJ/NX-series CPU Unit
Software User’s Manual
W501
NX701-

NX1P2-
NJ501-
NJ301-
NJ101-
Learning how to
program and set
up an
NJ/NX-series
CPU Unit. Mainly
software
information is
provided.
The following information is provided on a
Controller built with an NJ/NX-series CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3 language
specifications
NJ/NX-series Instructions
Reference Manual
W502
NX701-

NX1P2-
NJ501-
NJ301-
NJ101-
Learning detailed
specifications on
the basic
instructions of an
NJ/NX-series
CPU Unit.
The instructions in the instruction set (IEC
61131-3 specifications) are described.
NJ/NX-series CPU Unit
Motion Control User’s
Manual
W507
NX701-

NX1P2-
NJ501-
NJ301-
NJ101-
Learning about
motion control
settings and
programming
concepts.
The settings and operation of the CPU Unit and
programming concepts for motion control are
described.
NJ/NX-series Motion
Control Instructions
Reference Manual
W508
NX701-

NX1P2-
NJ501-
NJ301-
NJ101-
Learning about
the specifications
of the motion
control
instructions.
The motion control instructions are described.
NJ/NX-series CPU Unit
Built-in EtherCAT Port
User’s Manual
W505
NX701-

NX1P2-
NJ501-
NJ301-
NJ101-
Using the built-in
EtherCAT port on
an NJ/NX-series
CPU Unit.
Information on the built-in EtherCAT port is
provided. This manual provides an introduction
and provides information on the configuration,
features, and setup.
NJ/NX-series CPU Unit
Built-in EtherNet/IP
TM
Port
User’s Manual
W506
NX701-

NX1P2-
NJ501-
NJ301-
NJ101-
Using the built-in
EtherNet/IP port
on an
NJ/NX-series
CPU Unit.
Information on the built-in EtherNet/IP port is
provided. Information is provided on the basic
setup, tag data links, and other features.

Omron NX701-1620 Specifications

General

Brand	Omron
Model	NX701-1620
Category	Controller
Language	English