Omron NX701-1620 User Manual

Versions
22
NJ/NX-series Database Connection CPU Units User’s Manual (W527)
 Changing Information Displayed in Production Information Dialog Box
1. Click the Show Detail or Show Outline Button at the lower right of the Production Information
Dialog Box.
The view will change between the production information details and outline.
Outline View Detail View
The information that is displayed is different for the Outline View and Detail View. The Detail View
displays both the unit versions and DB Connection Service version. The Outline View displays
only the unit versions.
Note The hardware revision is separated by "/" and displayed on the right of the hardware version. The
hardware revision is not displayed for the Unit that the hardware revision is in blank.
Unit Versions of CPU Units and Sysmac Studio Versions
The functions that are supported depend on the unit version of the NJ/NX-series CPU Unit. The
version of Sysmac Studio that supports the functions that were added for an upgrade is also required
to use those functions. Refer to B-4 Version Information for the relationship between the unit versions
of the NJ/NX-series Database Connection CPU Units and the Sysmac Studio versions, and for the
functions that are supported by each unit version.

Omron NX701-1620 Specifications

General

Brand	Omron
Model	NX701-1620
Category	Controller
Language	English