OPTi CCA-TS2 User Manual

3-22 Operator’s Manual – OPTI CCA-TS2
3 CUSTOMIZATION
3.2.3.1.2 SettingupUserIDs
The <Users> menu is used to set up user
Identications.
1. To access this menu, select <System
Manager>Setup>Security> from the main
menu.
2. On the <Security> tab, press <Settings>
(Fig. 3-51).
3. Select the <Users> tab (Fig. 3-52).
 The default user ID is ADMIN. The ADMIN
user ID cannot be deleted, changed and cannot
expire. The default password for the ADMIN
user ID is ADMIN. To change this password, log
in as ADMIN and go to <Change Password>
in the security tab (see Section 3.2.3.2).
NOTE: YoucancreateanotheruserIDwithADMIN
rights,ifyoudonotwishtouseADMINas
youruserID.
4. Press (Fig. 3-52) to enter a new user to be
added to the list of authorized users.
The analyzer can store up to 300 user IDs.
Fig. 3-52 Users
• <Expiration Enable> (Fig. 3-50) allows
an administrator to set an expiration date for
each user ID.
• <Logon Timeout> (Fig. 3-50). When
security is enabled, users must log in to the
analyzer. When they are nished, they must
either log off using the <Log Off> button
in the bottom right corner, or the
analyzer can be set to log off automatically
after a set number of minutes of idle time.
Fig. 3-51 Settings
Fig. 3-50 Expiration

OPTi CCA-TS2 Specifications

General

Brand	OPTi
Model	CCA-TS2
Category	Measuring Instruments
Language	English