02_89
With the drive/reverse mode selector in the "R" (rear) position, the start button will
engage the reverse gear. The reverse gear selection is highlighted by the rear camera
image on the digital display.
02_90
With the vehicle at engine idle and the Drive/Reverse mode selector in the "D" (Drive)
position, the Start button selects the preselected drive mode.
For more information on driving modes, refer to the "Digital Display" paragraph.
02_91
Drive/reverse mode selector. (02_91, 02_92)
The Drive/Reverse mode selector has two positions:
•
position "D": used to select the normal forward gear;
•
position "R": used to select the normal reverse gear.
N.B.
WITH THE VEHICLE RUNNING, BY ACCIDENTALLY SELECTING THE REVERSE
MODE WITH THE SELECTOR IN "R". THE ACTUAL ENGAGEMENT OF THE RE-
60
To Next Page
Loading...
